There is useful Internetwork Troubleshooting Guide at:

http://www.cisco.com/univercd/cc/td/doc/cisintwk/itg_v1/index.htm

[watch for warp]

        Depending on interface type, check out appropriate chapter. Most of
the things are well explained.

        In your case, you should check out:

http://www.cisco.com/univercd/cc/td/doc/cisintwk/itg_v1/index.htm

[watch for wrap]


        Hope this helps.


Marko.

> -----Original Message-----
> From: McHugh Randy [mailto:[EMAIL PROTECTED]]
> Sent: laugardagur, 18. mam 2002. 21:14
> To: [EMAIL PROTECTED]
> Subject: interpeting show int command [7:44459]
> 
> 
> Does someone know of a link where I can learn how to interpet all the
> details of a show interface command? I know its kinda simple 
> , but need to
> know what it all means. Like here's an example. The top part is self
> explanatory but the lower part is where I do not uderstand.
> sh int fastEthernet 0/1
> FastEthernet0/1 is up, line protocol is up 
>   Hardware is Fast Ethernet, address is 00d0.ba51.0401 (bia 
> 00d0.ba51.0401)
>   MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, rely 255/255, 
> load 1/255
>   Encapsulation ARPA, loopback not set, keepalive not set
>   Half-duplex, 100Mb/s, 100BaseTX/FX
>   ARP type: ARPA, ARP Timeout 04:00:00
>   Last input 00:00:45, output 00:00:01, output hang never
>   Last clearing of "show interface" counters never
>   Queueing strategy: fifo
>   Output queue 0/40, 0 drops; input queue 0/75, 0 drops
>   5 minute input rate 17000 bits/sec, 2 packets/sec
>   5 minute output rate 2000 bits/sec, 3 packets/sec
>      11696790 packets input, 588816475 bytes, 0 no buffer
>      Received 27194 broadcasts, 1560 runts, 0 giants, 0 throttles
>      1 input errors, 1 CRC, 0 frame, 0 overrun, 30 ignored, 0 abort
>      0 watchdog, 15688 multicast
>      0 input packets with dribble condition detected
>      10445904 packets output, 1959387521 bytes, 0 underruns
>      0 output errors, 1320 collisions, 1 interface resets
>      0 babbles, 0 late collision, 9674 deferred
>      0 lost carrier, 0 no carrier
>      0 output buffer failures, 0 output buffers swapped out
[snip]




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=44461&t=44459
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to