r_r/irdshoin.htm#xtocid1
----- Original Message ----- From: "McHugh Randy" To: Sent: Saturday, May 18, 2002 4:14 PM Subject: interpeting show int command [7:44459] > Does someone know of a link where I can learn how to interpet all the > details of a show interface command? I know its kinda simple , but need to > know what it all means. Like here's an example. The top part is self > explanatory but the lower part is where I do not uderstand. > sh int fastEthernet 0/1 > FastEthernet0/1 is up, line protocol is up > Hardware is Fast Ethernet, address is 00d0.ba51.0401 (bia 00d0.ba51.0401) > MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, rely 255/255, load 1/255 > Encapsulation ARPA, loopback not set, keepalive not set > Half-duplex, 100Mb/s, 100BaseTX/FX > ARP type: ARPA, ARP Timeout 04:00:00 > Last input 00:00:45, output 00:00:01, output hang never > Last clearing of "show interface" counters never > Queueing strategy: fifo > Output queue 0/40, 0 drops; input queue 0/75, 0 drops > 5 minute input rate 17000 bits/sec, 2 packets/sec > 5 minute output rate 2000 bits/sec, 3 packets/sec > 11696790 packets input, 588816475 bytes, 0 no buffer > Received 27194 broadcasts, 1560 runts, 0 giants, 0 throttles > 1 input errors, 1 CRC, 0 frame, 0 overrun, 30 ignored, 0 abort > 0 watchdog, 15688 multicast > 0 input packets with dribble condition detected > 10445904 packets output, 1959387521 bytes, 0 underruns > 0 output errors, 1320 collisions, 1 interface resets > 0 babbles, 0 late collision, 9674 deferred > 0 lost carrier, 0 no carrier > 0 output buffer failures, 0 output buffers swapped out > > thanks Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=44464&t=44459 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]