This is off a 2504. It's also on my other 2500s with 12.x code What are you running for a router? one of those space heaters from a long time ago ;-)
MikeS CentralRouter#debug ppp authen CentralRouter#debug ppp authentication ? CentralRouter#debug ppp authentication PPP authentication debugging is on CentralRouter#ping 192.168.1.2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.168.1.2, timeout is 2 seconds: 00:05:16: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up 00:05:16: %DIALER-6-BIND: Interface BRI0:1 bound to profile Dialer1. 00:05:16: BR0:1 PPP: Treating connection as a callout 00:05:16: BR0:1 PPP: Phase is AUTHENTICATING, by the peer 00:05:16: BR0:1 AUTH: Started process 0 pid 28 00:05:16: BR0:1 CHAP: I CHALLENGE id 1 len 33 from "BranchRouter" 00:05:16: BR0:1 CHAP: O RESPONSE id 1 len 34 from "CentralRouter" 00:05:16: BR0:1 CHAP: I SUCCESS id 1 len 4 00:05:17: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:1, changed state to up... 00:05:22: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 555555 555555. Success rate is 0 percent (0/5) CentralRouter# Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=44613&t=44575 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]