Here is what I had on mine: 2 2524's RTG# 2d01h: Se0 PPP: Treating connection as a dedicated line 2d01h: Se0 PAP: O AUTH-REQ id 2 len 14 from "RTG" 2d01h: Se0 PAP: I AUTH-REQ id 2 len 14 from "RTF" 2d01h: Se0 PAP: I AUTH-ACK id 2 len 5 2d01h: Se0 PAP: Authenticating peer RTF 2d01h: Se0 PAP: O AUTH-ACK id 2 len 5
I configed RTG and RTF with pap auth. on s 0, did a shut and a no shut and got this result. Config on RTG: Current configuration: ! interface Serial0 ip address 1.1.1.2 255.255.255.0 encapsulation ppp no fair-queue service-module 56k clock source internal ppp authentication pap ppp pap sent-username RTG password 7 070C285F4D06 end Config on RTF: Current configuration: ! interface Serial0 ip address 1.1.1.1 255.255.255.0 encapsulation ppp no fair-queue ppp authentication pap ppp pap sent-username RTF password 7 060506324F41 end Using ver. RTF#sh ver Cisco Internetwork Operating System Software IOS (tm) 2500 Software (C2500-JS-L), Version 12.1(2), RELEASE SOFTWARE (fc1) Hope this helps. >From: "Mike Sweeney" >Reply-To: "Mike Sweeney" >To: [EMAIL PROTECTED] >Subject: RE: debug ppp authentication [7:44575] >Date: Tue, 21 May 2002 09:58:36 -0400 > >This is off a 2504. It's also on my other 2500s with 12.x code > >What are you running for a router? one of those space heaters from a long >time ago ;-) > > >MikeS > > >CentralRouter#debug ppp authen >CentralRouter#debug ppp authentication ? > > >CentralRouter#debug ppp authentication >PPP authentication debugging is on >CentralRouter#ping 192.168.1.2 > >Type escape sequence to abort. >Sending 5, 100-byte ICMP Echos to 192.168.1.2, timeout is 2 seconds: > >00:05:16: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up >00:05:16: %DIALER-6-BIND: Interface BRI0:1 bound to profile Dialer1. >00:05:16: BR0:1 PPP: Treating connection as a callout >00:05:16: BR0:1 PPP: Phase is AUTHENTICATING, by the peer >00:05:16: BR0:1 AUTH: Started process 0 pid 28 >00:05:16: BR0:1 CHAP: I CHALLENGE id 1 len 33 from "BranchRouter" >00:05:16: BR0:1 CHAP: O RESPONSE id 1 len 34 from "CentralRouter" >00:05:16: BR0:1 CHAP: I SUCCESS id 1 len 4 >00:05:17: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:1, changed >state >to up... >00:05:22: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 555555 >555555. >Success rate is 0 percent (0/5) >CentralRouter# _________________________________________________________________ Send and receive Hotmail on your mobile device: http://mobile.msn.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=44661&t=44575 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
