You may try adjusting your logging levels and see if you can get anything more meaningful. I don't have any ISDN interfaces or simulators at the moment so please post back if you find anything good.
Herold Heiko wrote: > > Hello, > ddr, dialer profiles, isdn (ininfluent though I think). > When a connection comes up something like this is logged: > > %LINK-3-UPDOWN: Interface BRI1/0:2, changed state to up > %DIALER-6-BIND: Interface BR1/0:2 bound to profile Di99 > %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI1/0:2, > changed state to > up > %ISDN-6-CONNECT: Interface BRI1/0:2 is now connected to > 0123456789 > remotename > > Unfortunately that log is always the same, if the router itself > called out > or was called nothing changes. On the router itself at the > moment it is easy > to find that info (sh dialer, sh isdn hist, sh isdn act), but > not in the > logfile. > > The only way I found is keeping active debug dialer event, > probably not the > best thing on a production router. > > Any idea how to get some meaningfull log ? > Thanks > Heiko > > -- > -- PREVINET S.p.A. [EMAIL PROTECTED] > -- Via Ferretto, 1 ph x39-041-5907073 > -- I-31021 Mogliano V.to (TV) fax x39-041-5907472 > -- ITALY > > Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=44830&t=44798 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]