Hi Kenny, First, the Cisco 2500 is an old router and doesn't support 10/100, the interfaces are 10BaseT running at 10mbps. The only way round this is to upgrade the router to either a 1700 or 2600 with a fast Ethernet module.
Second, try this url for the solaris http://www.enteract.com/~lspitz/interfaces.html There are two sections explaining the configuration of the if on Solaris boxes. There's two things I think you're missing, one you may need a patch on the server to allow vlsm on the hme0 port and secondly I think you're configuring the port under ifconfig which is a temporary measure, in that it will lose the config once you commit a reboot. Load the config using ifconfig, and then edit your file/etc/hostname file so the information will be read on the next startup. I hope this answer the questions you had. Best Regards Andy. PGP Key ID: 0x3075A920 PGP Fingerprint: B68F F21B C6F1 21B5 2829 2547 E977 83FB 3075 A920 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=45260&t=45238 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]