Mohd, You need to "recompile" the file(s) needed by MRTG so it can properly identify the NEW interface(s) to monitor. Check the documentation to guide you on how to do this. Good luck.
Elmer ----- Original Message ----- From: "Mohannad Khuffash" To: Sent: Wednesday, May 29, 2002 11:03 PM Subject: MRTG and ISDN [7:45421] > Dear All, > I have the MRTG since a long time worked well for monitoring my 60 remote > sites where most of them 1601 sereis routers(11.2 IOS), when i decide to > have a backup link for some sites i install BRI WIC and make the > configuration, the probem that the MTRG being confused for monitoring the > primary link which is a TDM or a RF(the ISDN is not active) , it give me > either zero traffic or a little steady traffic, where either didn't reflect > the true traffic !! Any one have an idea ? > > Thanks > > > -- > > > > > > > > Mohannad N. Khuffash > Network Administrator > Palestine Telecommunication Company > Tel: 00972-02-2982330 > Fax:00972-02-2980235 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=45439&t=45421 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
