Hello! Check the interfaces indices mrtg uses in the mrtg.conf, and check the indices the router knows of via a "snmpwalk ip.add.re.ss community ifDescr" (that's how you would do it with ucd-snmp on Linux, as an example) Cheers
Mohannad Khuffash wrote: > Dear All, > I have the MRTG since a long time worked well for monitoring my 60 remote > sites where most of them 1601 sereis routers(11.2 IOS), when i decide to > have a backup link for some sites i install BRI WIC and make the > configuration, the probem that the MTRG being confused for monitoring the > primary link which is a TDM or a RF(the ISDN is not active) , it give me > either zero traffic or a little steady traffic, where either didn't reflect > the true traffic !! Any one have an idea ? > > Thanks > > > -- Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=45631&t=45421 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]