haven't looked lately. In general, you can take the lab six months from now, or you can take it tomorrow. I.e. there are always last minute cancellations, so you can get in with very short notice. Otherwise, the wait list is about 4 months
I picked December for a particular reason, or actually a couple of particular reasons. I postponed from my scheduled June date. Best wishes. Chuck ----- Original Message ----- From: "Jay" To: Sent: Monday, 03 June, 2002 5:20 PM Subject: RE: Off Topic - inauspicious beginning [7:45592] > Hey out of curiosity, is december the soonest you can get in to the lab > now? How long is the wait list? > > > > > > > Not worth dragging this one out much longer. > > > > the router model is 36xx, which alone should be a big clue. the router is > > situated so I can easily get to the serial ports, leaving the aux and con > > ports up against the wall, so I have to reach behind, feel around with my > > fingers, find the port, and fumble around some more to plug in. all other > > models I have worked with have the con and aux port on the same side of the > > box as the data ports. I guess the last time I used it I was fooling around > > with aux port settings. it just never occurred to me that I was in the aux. > > > > DOH! > > > > On the other hand, all was not lost. I've had a good time simulating my > > customer network, checking out my policy routing etc. interesting design. on > > the clever side if I do say so myself. works like a charm, which means the > > implementation people either aren't getting it, or the vlans are not > > configured correctly on the switch. more on that another time. > > > > Chuck > > 182 and counting down. > > > > ""Kaminski, Shawn G"" wrote in message > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > Out of curiosity, what model router is the frame switch? > > > > > > Shawn K. > > > > > > > -----Original Message----- > > > > From: Chuck [SMTP:[EMAIL PROTECTED]] > > > > Sent: Saturday, June 01, 2002 2:32 PM > > > > To: [EMAIL PROTECTED] > > > > Subject: Off Topic - inauspicious beginning [7:45592] > > > > > > > > 183 days and counting. like the Flying Dutchman, I'll pass the Lab > > if... > > > > nope - better not make that threat. you never can tell.. > > > > > > > > actually, the gods of the Lab have already started with me. > > > > > > > > I haven't had the routers on in quite a few weeks. Been busy at > > > > work. > > Had > > > > some big projects to keep me out of my own lab for a while. > > > > > > > > So I have a customer network that I need to clean up a few things > > > > on. I set up a model in my own lab, cable everything up to emulate > > > > the customer's situation, and begin. First step - configure the > > > > frame relay switch. > > > > > > > > try to get into enable mode. Keep getting asked for a password. > > > > Rats! > > What > > > > is the enable password? I try the usual suspects, and come up empty. > > > > > > > > no problem. I'll just do a quick password recovery. I do a search on > > CCO, > > > > quickly locate the procedure, and begin... > > > > > > > > power off. power on. control break. no luck - the router just boots > > > > as normal. > > > > > > > > hhmmmmm........ I've done recoveries before. no biggie. why am I > > > > having the problem? > > > > > > > > Now I know the smart guys among you will tell me it's because I use > > hyper > > > > terminal. so I close HT, and load up my copy of Tera Term. repeat > > > > the power off power on sequence, try alt b, and no luck. the router > > > > loads as > > usual. > > > > > > > > now I'm panicking. I have been trying this via my term server. I go > > > > directly into the router, replacing the term server cable with a > > > > direct > > connection. > > > > > > > > still no luck. alt b with Tera term, control break with hyper term. > > > > the router still loads as normal. > > > > > > > > Well, I've figured out the problem. I've gotten into the router. I'm > > > > happily working on my customer simulation. the frame switch is > > > > configured as I wish. > > > > > > > > the question to all of you - what was the problem? what was the > > solution? > > > > > > > > regards > > > > > > > > Chuck > > > > December 2 - 183 days and counting > > > > the gods of the Lab permitting.... ;-> Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=45739&t=45592 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
