Hi All, Need clarfication on DDR with NAT.
I have got a Lease Line to Internet connected through Cisco Router and PIX firewall. Internet Lease Line-->Router--> PIX outside--> PIX Inside. I have been provided a /30 subnet for WAN and /28 subnet for LAN by the local ISP. Now i need to provide a DDR for the lease line incase of lease line outages. I have configured the DDR, but each time i dial ISP i am being assigned a dynmic IP address and local ISP does not provide any staitc ip address. Due to this dynamic Ip address allocation i am not able to route the local lan traffic or to provide browsing faclity. I thought of configuring a NAT with /28 obtained from ISP, but is this a better solution? Another problem which i noticed Cisco Allows only one Overload command at a time either it should on the serial interface or it should be on the dialer interface. Is there any way i can provide both the overloads at the same time, like higher metric routes. Need your valuable inputs and sugesstion on this. Thanks in Advance, Regards.. Anil __________________________________________________ Do You Yahoo!? Yahoo! - Official partner of 2002 FIFA World Cup http://fifaworldcup.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=46149&t=46149 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
