Hi, I have read both BGP 4 Command & Reference + CCNP Building Scable Cisco Networks, they both state that peer-group and route reflectors are not compatible to each other. Yet, when I tried to configure both together... it seems to work for me :( Am I missing something important here?
RouterB#sh ip bgp ne BGP neighbor is 172.16.0.2, remote AS 1, internal link Index 1, Offset 0, Mask 0x2 Route-Reflector Client group1 peer-group member BGP version 4, remote router ID 172.16.0.2 BGP state = Established, table version = 1, up for 00:28:41 Last read 00:00:40, hold time is 180, keepalive interval is 60 seconds Minimum time between advertisement runs is 5 seconds Received 36 messages, 0 notifications, 0 in queue Sent 36 messages, 0 notifications, 0 in queue Prefix advertised 0, suppressed 0, withdrawn 0 Connections established 2; dropped 1 Last reset 00:28:52, due to RR client config change 0 accepted prefixes consume 0 bytes 0 history paths consume 0 bytes Connection state is ESTAB, I/O status: 1, unread input bytes: 0 Local host: 172.16.0.1, Local port: 11003 Foreign host: 172.16.0.2, Foreign port: 179 Enqueued packets for retransmit: 0, input: 0 mis-ordered: 0 (0 bytes) Event Timers (current time is 0x263A98): Timer Starts Wakeups Next Retrans 32 0 0x0 TimeWait 0 0 0x0 AckHold 31 19 0x0 SendWnd 0 0 0x0 KeepAlive 0 0 0x0 GiveUp 0 0 0x0 PmtuAger 0 0 0x0 DeadWait 0 0 0x0 iss: 904884479 snduna: 904885079 sndnxt: 904885079 sndwnd: 15785 irs: 3309753480 rcvnxt: 3309754096 rcvwnd: 15769 delrcvwnd: 615 SRTT: 310 ms, RTTO: 780 ms, RTV: 80 ms, KRTT: 0 ms minRTT: 24 ms, maxRTT: 300 ms, ACK hold: 200 ms Flags: higher precedence, nagle Datagrams (max data segment is 1460 bytes): Rcvd: 44 (out of order: 0), with data: 31, total data bytes: 615 Sent: 52 (retransmit: 0), with data: 31, total data bytes: 599 BGP neighbor is 193.16.0.2, remote AS 1, internal link Index 1, Offset 0, Mask 0x2 Route-Reflector Client group1 peer-group member BGP version 4, remote router ID 0.0.0.0 BGP state = Active, table version = 0 Last read 00:04:24, hold time is 180, keepalive interval is 60 seconds Minimum time between advertisement runs is 5 seconds Received 33 messages, 0 notifications, 0 in queue Sent 37 messages, 1 notifications, 0 in queue Prefix advertised 0, suppressed 0, withdrawn 0 Connections established 2; dropped 2 Last reset 00:04:45, due to BGP Notification sent, hold time expired 0 accepted prefixes consume 0 bytes 0 history paths consume 0 bytes No active TCP connection RouterB# Any ideas would be greatly appreciated. Thanks -- Hunt Lee WebCentral Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=46464&t=46464 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]