I'm using peer-groups with route-reflectors on different Cisco platforms
(2500, 7500, 12000) and it works fine !!

--
Stephane LITKOWSKI
Student in a French computer science school
EPITA Telecom & Network specialization
CCNA + CCNP
EMail : [EMAIL PROTECTED]

""Hunt Lee""  a icrit dans le message de news:
[EMAIL PROTECTED]
> Hi,
>
> I have read both BGP 4 Command & Reference + CCNP Building Scable Cisco
> Networks, they both state that peer-group and route reflectors are not
> compatible to each other.  Yet, when I tried to configure both together...
> it seems to work for me   :(  Am I missing something important here?
>
> RouterB#sh ip bgp ne
> BGP neighbor is 172.16.0.2,  remote AS 1, internal link
>  Index 1, Offset 0, Mask 0x2
>   Route-Reflector Client
>   group1 peer-group member
>   BGP version 4, remote router ID 172.16.0.2
>   BGP state = Established, table version = 1, up for 00:28:41
>   Last read 00:00:40, hold time is 180, keepalive interval is 60 seconds
>   Minimum time between advertisement runs is 5 seconds
>   Received 36 messages, 0 notifications, 0 in queue
>   Sent 36 messages, 0 notifications, 0 in queue
>   Prefix advertised 0, suppressed 0, withdrawn 0
>   Connections established 2; dropped 1
>   Last reset 00:28:52, due to RR client config change
>   0 accepted prefixes consume 0 bytes
>   0 history paths consume 0 bytes
> Connection state is ESTAB, I/O status: 1, unread input bytes: 0
> Local host: 172.16.0.1, Local port: 11003
> Foreign host: 172.16.0.2, Foreign port: 179
>
> Enqueued packets for retransmit: 0, input: 0  mis-ordered: 0 (0 bytes)
>
> Event Timers (current time is 0x263A98):
> Timer          Starts    Wakeups            Next
> Retrans            32          0             0x0
> TimeWait            0          0             0x0
> AckHold            31         19             0x0
> SendWnd             0          0             0x0
> KeepAlive           0          0             0x0
> GiveUp              0          0             0x0
> PmtuAger            0          0             0x0
> DeadWait            0          0             0x0
>
> iss:  904884479  snduna:  904885079  sndnxt:  904885079     sndwnd:  15785
> irs: 3309753480  rcvnxt: 3309754096  rcvwnd:      15769  delrcvwnd:    615
>
> SRTT: 310 ms, RTTO: 780 ms, RTV: 80 ms, KRTT: 0 ms
> minRTT: 24 ms, maxRTT: 300 ms, ACK hold: 200 ms
> Flags: higher precedence, nagle
>
> Datagrams (max data segment is 1460 bytes):
> Rcvd: 44 (out of order: 0), with data: 31, total data bytes: 615
> Sent: 52 (retransmit: 0), with data: 31, total data bytes: 599
>
>
>  BGP neighbor is 193.16.0.2,  remote AS 1, internal link
>  Index 1, Offset 0, Mask 0x2
>   Route-Reflector Client
>   group1 peer-group member
>   BGP version 4, remote router ID 0.0.0.0
>   BGP state = Active, table version = 0
>   Last read 00:04:24, hold time is 180, keepalive interval is 60 seconds
>   Minimum time between advertisement runs is 5 seconds
>   Received 33 messages, 0 notifications, 0 in queue
>   Sent 37 messages, 1 notifications, 0 in queue
>   Prefix advertised 0, suppressed 0, withdrawn 0
>   Connections established 2; dropped 2
>   Last reset 00:04:45, due to BGP Notification sent, hold time expired
>   0 accepted prefixes consume 0 bytes
>   0 history paths consume 0 bytes
>   No active TCP connection
> RouterB#
>
>
> Any ideas would be greatly appreciated.
>
> Thanks
>
> --
>
> Hunt Lee
>
> WebCentral




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=46474&t=46464
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to