I only see the BEFORE and not AFTER. Anyway, "sho dialer" on rtr-A should tell you the reason why the call was initiated. Are you running any routing protocols on the BRI int?
--- Original Message --- From: "Thomas Crowe" To: [EMAIL PROTECTED] Subject: RE: ISDN -- challenge! [7:46496] >Could you post the output from a >'debug dialer events' command. Then >we can see the reason that routerB >initiates the call. > >______________________________ > >Thomas Crowe >Senior Systems Engineer / Senior Architect >EMC Proven Master Architect >CTS Professional Services - Atlanta >______________________________ > >-----Original Message----- >From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] >Sent: Thursday, June 13, 2002 6:34 PM >To: [EMAIL PROTECTED] >Subject: ISDN -- challenge! [7:46496] > > > > >Router A and Router B are connected to an Atlas 550 via BRI interfaces > >Router A ---- ATLAS --- ROUTER B > >Both router are configured with DDR Dialer maps so that Router A can call >router B or vice-versa (basic stuff). > >When Router A is called by Router B, Router A answers normally and the link >goes up, but then (surprisingly), Router A attempts to initiate a >connection >to Router B . This connection fails because I only configured the phone >number for one channel (Isdn error 17: User is busy). > >Is this calling of Router A a normal behavior? (I don't think so!) > >I fixed the problem by simpling removing the phone number from the map >statement of Router A. I am posting here the debug before and after I >removed the phone number on A. The debug where captured on Router A. > >I have spent the day on the apparently trivial question: why is Router A >calling Router B when I have no call back of any sort. >Still no light ... Want to step up to the challenge? :) > >Before: > >00:32:45: ISDN BR0/0: RX on B1 at 64 Kb/s >00:32:45: ISDN BR0/0: Event: Accepting the call id 0xD >00:32:193273528320: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to up >01:51:113824615516: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up >00:32:45: ISDN BR0/0: TX -> CALL_PROC pd = 8 callref = 0x84 >00:32:45: Channel ID i = 0x89 >00:32:45: ISDN BR0/0: TX -> CONNECT pd = 8 callref = 0x84 >00:32:45: Channel ID i = 0x89 >00:32:45: ISDN BR0/0: RX SETUP pd = 8 callref = 0x09 >00:32:47: Bearer Capability i = 0x8890 >00:32:47: Channel ID i = 0x83 >00:32:47: Keypad Facility i = '5553333' >00:32:47: ISDN BR0/0: RX RELEASE pd = 8 callref = 0x09 >00:32:47: ISDN BR0/0: RX SETUP pd = 8 callref = 0x0A >00:32:49: Bearer Capability i = 0x8890 >00:32:49: Channel ID i = 0x83 >00:32:49: Keypad Facility i = '5553333' >00:32:49: ISDN BR0/0: RX RELEASE pd = 8 callref = 0x0A >00:32:49: ISDN BR0/0: RX SETUP pd = 8 callref = 0x0B >00:32:51: Bearer Capability i = 0x8890 >00:32:51: Channel ID i = 0x83 >00:32:51: Keypad Facility i = '5553333' >00:32:51: %ISDN-6-CONNECT: Interface BRI0/0:1 is now connected to isdn3 >00:32:51: ISDN BR0/0: RX RELEASE pd = 8 callref = 0x0B >00:32:51: ISDN BR0/0: RX SETUP pd = 8 callref = 0x0C >00:32:53: Bearer Capability i = 0x8890 >00:32:53: Channel ID i = 0x83 >00:32:53: Keypad Facility i = '5553333' >00:32:53: ISDN BR0/0: RX RELEASE pd = 8 callref = 0x0C >00:32:53: ISDN BR0/0: RX on B1 at 64 Kb/s >00:41:53: ISDN BR0/0: Event: Accepting the call id 0x10 >00:41:227633266688: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to up >02:00:146028888128: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to >5551234 >00:41:53: ISDN BR0/0: TX -> CALL_PROC pd = 8 callref = 0x85 >00:41:53: Channel ID i = 0x89 >00:41:53: ISDN BR0/0: TX -> CONNECT pd = 8 callref = 0x85 >00:41:53: Channel ID i = 0x89 >00:41:53: ISDN BR0/0: RX 02:00:37: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:1, changed >state to up >00:41:56: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0/0:1, changed >state to >up. >02:00:40: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 5551234 >isdn1 >00:41:59: %ISDN-6-CONNECT: Interface BRI0/0:1 is now connected to isdn3.. > >[GroupStudy.com removed an attachment of type text/x- vcard which had a name >of Thomas Crowe.vcf] f=7&i=46564&t=46496 >-------------------------------------------------- >FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=46604&t=46496 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
