This may sound daft, and I'm almost embarrassed to suggest it, but will you humour me and remove the "ip host isdn2 2065 1.1.1.1" command from Router-isdn1. Distant memories are haunting me.
I haven't got an ISDN simulator to play with at home, but I'm stumped too. Gaz ""Pierre-Alex Guanel"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > No I am not running any routing protocol! > > Here are my configs: > > isdn1 (router A) > > isdn1#show run > Building configuration... > > Current configuration : 1166 bytes > ! > version 12.2 > service timestamps debug uptime > service timestamps log uptime > no service password-encryption > ! > hostname isdn1 > ! > enable secret 5 $1$9PdI$e3RshbiT8O9CiQxW317VQ0 > ! > username isdn2 password 0 cisco > username isdn3 password 0 cisco > ip subnet-zero > ! > ! > no ip domain-lookup > ip host isdn2 2065 1.1.1.1 > ! > isdn switch-type basic-ni > ! > ! > ! > interface Loopback0 > ip address 1.1.1.1 255.255.255.255 > ! > interface FastEthernet0/0 > no ip address > shutdown > duplex auto > speed auto > ! > interface Serial0/0 > no ip address > shutdown > no fair-queue > ! > interface BRI0/0 > ip address 172.16.1.1 255.255.255.0 > encapsulation ppp > dialer map ip 172.16.1.2 broadcast 5554000 > dialer-group 1 > isdn switch-type basic-ni > isdn spid1 51055512340001 > isdn spid2 51055512350001 > ppp authentication chap > ! > interface FastEthernet0/1 > no ip address > shutdown > duplex auto > speed auto > ! > interface Serial0/1 > no ip address > shutdown > ! > ip classless > ip route 0.0.0.0 0.0.0.0 172.16.1.2 > ip http server > ip pim bidir-enable > ! > dialer-list 1 protocol ip permit > ! > line con 0 > escape-character 19 > line aux 0 > no exec > transport input all > line vty 0 4 > password san-fran > login > ! > no scheduler allocate > end > > -------------------------------------------------------- > > isdn 2 (Router B) > > isdn2#show run > Building configuration... > > Current configuration : 1115 bytes > ! > version 12.2 > service timestamps debug uptime > service timestamps log uptime > no service password-encryption > ! > hostname isdn2 > ! > logging rate-limit console 1 > enable secret 5 $1$8Z95$B21CJMn0N8R9EqeGB8olj1 > ! > username isdn1 password 0 cisco > ip subnet-zero > ! > ! > no ip domain-lookup > ip host switch 2065 1.1.1.1 > ! > isdn switch-type basic-ni > ! > ! > ! > interface Loopback0 > ip address 1.1.1.1 255.255.255.255 > ! > interface FastEthernet0/0 > no ip address > shutdown > duplex auto > speed auto > ! > interface BRI0/0 > ip address 172.16.1.2 255.255.255.0 > encapsulation ppp > dialer map ip 172.16.1.1 broadcast 5551234 > dialer-group 1 > isdn switch-type basic-ni > isdn spid1 51055540000001 > isdn spid2 51055540010001 > ppp authentication chap > ! > interface FastEthernet0/1 > no ip address > shutdown > duplex auto > speed auto > ! > ip classless > ip route 0.0.0.0 0.0.0.0 172.16.1.1 > no ip http server > ip pim bidir-enable > ! > access-list 1 permit any > dialer-list 1 protocol ip list 1 > ! > line con 0 > escape-character 18 > line aux 0 > no exec > transport input all > line vty 0 4 > password san-fran > login > ! > no scheduler allocate > end Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=46614&t=46496 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]