hi group, I have a customer who has take 64 up link and burstable 128 downlink .Problem is that i give sh int command it is showing
5 minute input rate 148000 bits/sec, 218 packets/sec 5 minute output rate 62000 bits/sec, 36 packets/sec But i have configure following on serial interface Serial0/2 mtu 2048 bandwidth 512 ip address 216.252.243.1 255.255.255.252 ip access-group 107 in ip access-group 107 out no ip proxy-arp ip wccp web-cache redirect out ip wccp web-cache redirect in rate-limit input 64000 71680 71680 conform-action transmit exceed-action drop rate-limit output 64000 131072 131072 conform-action transmit exceed-action drop encapsulation ppp can some body help me to tell .why this is happening when i have configured 64 kbps on uplick of customer which input traffic for my router is showing 148kbps and out traffic 62 kbps why in traffic is exceeding Thanx in advance kaushalender Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=47133&t=47133 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]