Actually, x is in bits and y and z are in bytes.
wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > When you use - > > rate-limit input x y z conform-action transmit , > > x is in bytes and y and z are in bits > > HTH > > Dom. > > > > > "kaushalender" > Sent by: [EMAIL PROTECTED] > 21/06/2002 14:07 > Please respond to "kaushalender" > > > To: [EMAIL PROTECTED] > cc: > Subject: rate limit plz help [7:47133] > > > hi group, > > I have a customer who has take 64 up link and burstable 128 downlink > .Problem is that i give sh int command it is showing > > 5 minute input rate 148000 bits/sec, 218 packets/sec > 5 minute output rate 62000 bits/sec, 36 packets/sec > > But i have configure following on serial > > interface Serial0/2 > mtu 2048 > bandwidth 512 > ip address 216.252.243.1 255.255.255.252 > ip access-group 107 in > ip access-group 107 out > no ip proxy-arp > ip wccp web-cache redirect out > ip wccp web-cache redirect in > rate-limit input 64000 71680 71680 conform-action transmit > exceed-action drop > rate-limit output 64000 131072 131072 conform-action transmit > exceed-action drop > encapsulation ppp > > can some body help me to tell .why this is happening when i have > configured 64 kbps on uplick of customer which input traffic for my > router is showing 148kbps > and out traffic 62 kbps why in traffic is exceeding > > Thanx in advance > kaushalender Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=47145&t=47133 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
