did you remember to do a shut/no shut on the physical ATM interface after you made the change?
also, idle curiousity - how many T1's are you inverse multiplexing? Was the circuit ever working? I ask because sometimes when you have a single ATM T1, the telcos do not terminate it to an IMA port, and IMA will not work. Chuck wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hello all, I'm having a problem with my IMA interface on a 7206 running > 12.2(5) (c7200-ds-mz.122-5.bin). When I switched from UBR to VBR-NRT the > pvc I was working on disappeared from the running config and no data will > pass through that circuit. I tried to add the pvc back into the config but > all I get is this in the log: > > %ATM-3-FAILCREATEVC: ATM failed to create VC(VCD=39, VPI=1, VCI=140) on > Interface ATM4/ima0, (Cause of the failure: vpi/vci pair already in use) > > I tried removing the interface and adding it back in with the same results. > I've done a 'clear interface' on many frame relay links before with no ill > effects but I'm hesistant to do the same thing here since, at times, the IMA > interface is another beast altogether from your standard interface. The > only other option I'm aware of is to reboot the router which is very > difficult because it's right at the core. > > Has anyone tried the 'clear interface atm4/ima0' command without causing > problems or is there another way to clear the vpi/vci config from memory so > it will accept the pvc correctly again without rebooting? > > Thanks!! Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=47870&t=47849 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
