Hello all, I'm having a problem with my IMA interface on a 7206 running 12.2(5) (c7200-ds-mz.122-5.bin). When I switched from UBR to VBR-NRT the pvc I was working on disappeared from the running config and no data will pass through that circuit. I tried to add the pvc back into the config but all I get is this in the log:
%ATM-3-FAILCREATEVC: ATM failed to create VC(VCD=39, VPI=1, VCI=140) on Interface ATM4/ima0, (Cause of the failure: vpi/vci pair already in use) I tried removing the interface and adding it back in with the same results. I've done a 'clear interface' on many frame relay links before with no ill effects but I'm hesistant to do the same thing here since, at times, the IMA interface is another beast altogether from your standard interface. The only other option I'm aware of is to reboot the router which is very difficult because it's right at the core. Has anyone tried the 'clear interface atm4/ima0' command without causing problems or is there another way to clear the vpi/vci config from memory so it will accept the pvc correctly again without rebooting? Thanks!! Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=47849&t=47849 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]