Perl script that would do that is simplest/cheapest solution. Sasa CCIE No. 8635
"Lupi, Guy" wrote: > > I was wondering if anyone knows of a device that can do this. I have a > situation where I need to provide automatic failover in the event that > connectivity to the Internet is lost from an Ethernet port. The Ethernet > port will not go down, it will be up, just IP connectivity will be lost. > For various reasons I cannot run a routing protocol over the Ethernet port > at all. Does anyone know if there is a unit that can ping a configurable IP > address and dial an ISDN line in the event that the ping times out a certain > number of times? It must have 2 routed Ethernet ports, one to connect to > the provider and one to connect to the users LAN, and an ISDN BRI U > interface. I appreciate any suggestions. > > Guy H. Lupi > CCIE No. 9275 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=48022&t=47652 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
