Hi, We are facing a problem with getting the default gateway information from the AS5300 access server. We are using a windows client to connect that AS5300 via dial-up modem. When we use callback option, there is no problem and we can get the default gateway from AS5300. On the other hand if we disable the callback option for the user profile on the Cisco Secure ACS, we couldn't get default gateway IP. When we write down the ipconfig command on the command prompt, the default gateway section comes up with blank. So, by using the windows PC, we couldn't connect to any devices whose IP addresses are out of our IP segment (10.0.0.0). We are little confused with whether the default gateway information comes from Ciscso Secure ACS or AS5300. Any answers on this issue would be greatly appreciated. Ozan Akdemir
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=48169&t=48169 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]