Looks like your returning traffic was blocked. Try active FTP. Yoshi
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Simer Mayo Sent: Monday, July 08, 2002 4:18 PM To: [EMAIL PROTECTED] Subject: Passive FTP [7:48357] The users are on the inside interface behind the PIX firewall and are trying to make an pftp connection to the outside world. They are being authenticated from the outside server but then the section hangs trying to do a list command. The fixup protocol port 21 is enable on PIX and there is no explicit outbound restriction from the inside interface. The outside server is using port range 40000-40020 for passive FTP. I tried enabling this range on the fixup protocol too but it didn't work. Please advice Thanks much SM Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=48361&t=48357 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]