Hi,
I tried it before. Without NAT it didn't work, but you can do it
using NAT; translating IP address to the same IP address. I suppose it's
related to stateful inspection.
Bulent
-----Original Message-----
From: Ivan [mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 11, 2002 6:27 PM
To: [EMAIL PROTECTED]
Subject: PIX without NAT. [7:48593]
Hello all,
I have simple pix problems, can anyone help me?(Thank you very much)
If I have a pix have two interface as the following:
inside: 10.10.10.1 / 24
outside : 192.168.1.1 / 24
and without nat (nat 0 0 0), I think that that must can allow inside hosts
to access outside, but
can I allow the outside PC to access the inside's hosts?
e.g. access-list 10 permit tcp any host 10.10.10.2 eq smtp (or any services)
Thank you very much for your help!!!!
Regards,
Ivan
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=48660&t=48593
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
