You need to setup access lists for inside and outside traffic. Assuming that you're just playing with this at home, only want to allow established traffic into your network, and want to let all traffic out of your LAN to the world, do something like:
access-list acl_inside permit ip any any access-group acl_inside in interface inside DISCLAIMER: This is bad practice for most all production networks. Only in rare cases would you really want to allow unrestricted access from the LAN to the Internet. For a home / test network, it's probably not a big deal. Good luck, Craig At 02:24 PM 7/14/2002 +0000, you wrote: >Team, >I just got my new baby Pix 501 (wow...how small it is, it looks like a >toy)....Below is my configuration, my problem is that Pat does not seems to >be able to work, I have cable-modem and they only provided one ip, I am able >to ping from the firewall to any pc on my LAN, I am able to ping from the >firewall to any ip on the Internet but I am not able to ping from any PC on >my LAN to any ip on the Internet, Be aware that this id the first time I am >using a Cisco Firewall, This morning I got the book Cisco Secure PIX >Firewall. Your help is very appreciated as always.......Another question, >The ios on this baby is the same on the high end firewalls, If I am able to >learn as much as my brain can take will I be able to configure a high-end >pix and feel comfortable..... > > >Thanks, (What I am doing wrong......) > > >JB > >pixfirewall# show config >: Saved >: >PIX Version 6.1(1) >nameif ethernet0 outside security0 >nameif ethernet1 inside security100 >enable password MTz0ptrM4U8gsjGv encrypted >passwd 2KFQnbNIdI.2KYOU encrypted >hostname pixfirewall >fixup protocol ftp 21 >fixup protocol http 80 >fixup protocol h323 1720 >fixup protocol rsh 514 >fixup protocol rtsp 554 >fixup protocol smtp 25 >fixup protocol sqlnet 1521 >fixup protocol sip 5060 >fixup protocol skinny 2000 >names >pager lines 24 >interface ethernet0 10baset >interface ethernet1 10full >mtu outside 1500 >mtu inside 1500 >ip address outside dhcp setroute >ip address inside 192.168.74.11 255.255.255.0 >ip audit info action alarm >ip audit attack action alarm >pdm logging informational 100 >pdm history enable >arp timeout 14400 >global (outside) 1 interface >nat (inside) 1 0.0.0.0 0.0.0.0 0 0 >timeout xlate 0:05:00 >timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h323 >0:05:00 sip 0:30:00 sip_media 0:02:00 >timeout uauth 0:05:00 absolute >aaa-server TACACS+ protocol tacacs+ >aaa-server RADIUS protocol radius >http server enable >http 192.168.74.11 255.255.255.0 inside >no snmp-server location >no snmp-server contact >snmp-server community public >no snmp-server enable traps >floodguard enable >no sysopt route dnat >telnet timeout 5 >ssh timeout 5 >dhcpd auto_config outside >terminal width 80 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=48772&t=48760 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
