Hi There. I'm configuring GTS and I'd like an advice. The command line for GTS is (in interface config mode): - traffic-shape rate bit-rate [burst-size [excess-burst-size]]
I think that the method to get the values to configure GTS is similar to FRTS, like the folowing: bit-rate=minCIR burst-size=Bc excess-burst-size=Be Tc=1/8s Based on that considerations, if I want to limit a traffic to 10Mbps guaranteed plus 5Mbps burst (total 15Mbps), the calculation should be: EIR=(10Mbps+5Mbps)-10Mbps=5000000bps bit-rate=minCIR=10Mbps=10000000bps burst-size=Bc=minCir/8=10000000bps/8=1250000bps excess-burst-size=Be=EIR/8=5000000bps/8=625000bps or excess-burst-size=Be=Bc=1250000bps ??? Is that right? Is there any misunderstanding on those calculations? Tks for your advices. Luciano. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=48872&t=48872 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]