transparent mode wont update the vtp domain info to or from a server. If the info was inserted from a switch in transparent mode it wont go anywhere.
If the new vlan data was inserted in a switch that is running in server mode, it will propagate the info to other servers and clients in the same domain. Larry Letterman Cisco Systems [EMAIL PROTECTED] -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of MADMAN Sent: Thursday, July 18, 2002 11:06 AM To: [EMAIL PROTECTED] Subject: Re: FW: Help with vlan!! [7:49127] You have to be either transparent or server mode to add a VLAN. Were you in client mode originally? Dave GEORGE wrote: > > I got it to work!!! > The only thing I had to change was on the transparent mode add the vlan > and the name and it work, those this have to happen every time you add a > new vlan to the switch network....? > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of > Arlante, Neil > Sent: Thursday, July 18, 2002 10:40 AM > To: [EMAIL PROTECTED] > Subject: RE: Help with vlan!! [7:49127] > > did u tried these: > > is it really trunking betw 3524 and 2900xl, or betw different switches? > sh > trunk > > compare vtp revision numbers if they are the same...sh vtp domain > > see if vtp advertisements are sent and received... sh vtp statistics > > HTH, > > -----Original Message----- > From: GEORGE [mailto:[EMAIL PROTECTED]] > Sent: Thursday, July 18, 2002 10:44 PM > To: [EMAIL PROTECTED] > Subject: Help with vlan!! [7:49127] > > I currently have just 2 vlan's in my network. The native 1 and vlan 2. I > have a 7513 doing the routing with a fast Ethernet and 3500xl and 2900xl > in my network. I have one vtp server and I added vlan 2 it works! . > then I created another vlan 3 on the router with ip 10.0.4.1 isl > encapsulation on it and add it to the vtp server. (3508xl) and name it > lab , doesn't work! I have trunking all the way here is a diagram of my > network > (port1) > 7513-----3524----trunking----2900xl---trunking---2900xl-users > > on the 2900xl that the users are connected I place switchport access > vlan 3 on all the ports and made it a client with the proper vtp > domain.. The other 2900 xl that's connected to my 3524 is also a client > with the correct vtp domain however when I do a show vlan I show vlan 3 > but a different vlan name not lab > > my question is what im I doing wrong? > Do I have to configure a vtp server for each vlan? -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=49165&t=49127 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]