Copied directly from Cisco: On these platforms, the Cisco IOS software image is actually running directly from the Flash memory (flash in read-only mode). Therefore, you cannot copy the Cisco IOS software image from the TFTP server to the Flash if you are in user privileged EXEC mode (router#). You have to configure the router or access server to boot into Rxboot mode (flash in read/write mode).
Here's the link: http://www.cisco.com/warp/public/130/sw_upgrade_proc_flash.shtml If you did a search for "read-only" you would find that this has also been posted before. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=49574&t=49568 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
