Been away from routers for a while whats the command to figure out which serial in in a back to abck config is DCE/DTE ?
Reason is I have 2 back to back 2503's. My serial cable is going to S0 in each router. IN the configs, I have Bris Router# int s0 ip address 192.168.1.1 255.255.255.0 encapsulation ppp bandwidth 64 clock rate 64000 no shut Melb Router# int s0 ip address 192.168.1.2 255.255.255.0 encapsulation ppp bandwidth 64 no shut What am I missing as I have the int face is up, line proto down. I really should be able to figure this one out, however its late afternoon in Australia and I want to sleep after a big night of watching Buffy repeats. John Brandis Desk: 02-9278-0629 Mobile: 0414-495-320 [EMAIL PROTECTED] www.solution6.com ********************************************************************** visit http://www.solution6.com visit http://www.eccountancy.com - everything for accountants. UK Customers - http://www.solution6.co.uk ********************************************************************* This email message (and attachments) may contain information that is confidential to Solution 6. If you are not the intended recipient you cannot use, distribute or copy the message or attachments. In such a case, please notify the sender by return email immediately and erase all copies of the message and attachments. Opinions, conclusions and other information in this message and attachments that do not relate to the official business of Solution 6 are neither given nor endorsed by it. ********************************************************************* Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=49625&t=49625 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]