the side which gives you the clockrate is DCE side *usually, serial cable with Female connector*, in your case that is the serial interface on "Bris" router.
btw: The command is: show controllers serial 0 -- Milan Jovancic From: John Brandis To: [EMAIL PROTECTED] Date: Thursday, July 25, 2002, 8:52:13 AM Subject: DCE or DTE [7:49625] ===8 Been away from routers for a while JB> whats the command to figure out which serial in in a back to abck config is JB> DCE/DTE ? JB> Reason is I have 2 back to back 2503's. My serial cable is going to S0 in JB> each router. IN the configs, I have JB> Bris Router# JB> int s0 JB> ip address 192.168.1.1 255.255.255.0 JB> encapsulation ppp JB> bandwidth 64 JB> clock rate 64000 JB> no shut JB> Melb Router# JB> int s0 JB> ip address 192.168.1.2 255.255.255.0 JB> encapsulation ppp JB> bandwidth 64 JB> no shut JB> What am I missing as I have the int face is up, line proto down. I really JB> should be able to figure this one out, however its late afternoon in JB> Australia and I want to sleep after a big night of watching Buffy repeats. JB> John Brandis JB> Desk: 02-9278-0629 JB> Mobile: 0414-495-320 JB> [EMAIL PROTECTED] JB> www.solution6.com JB> ********************************************************************** JB> visit http://www.solution6.com JB> visit http://www.eccountancy.com - everything for accountants. JB> UK Customers - http://www.solution6.co.uk JB> ********************************************************************* JB> This email message (and attachments) may contain information that is JB> confidential to Solution 6. If you are not the intended recipient you cannot JB> use, distribute or copy the message or attachments. In such a case, please JB> notify the sender by return email immediately and erase all copies of the JB> message and attachments. Opinions, conclusions and other information in JB> this message and attachments that do not relate to the official business of JB> Solution 6 are neither given nor endorsed by it. JB> ********************************************************************* ===8<===========End of original message text=========== Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=49646&t=49625 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]