To erase the flash, try:
Router#erase flash

To boot to ROMMON, try:
Router#config t
Router(config)#config 0x2100

Then reload. To change the configuration register back to "boot from flash"
while in ROMMON, try:

rommon1>confreg 0x2102

Hope this helps,

robert



Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=49768&t=49728
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to