Hi All Thanks for the reply on my DCE/DTE question. Resolved now. Have a new IOS image that I wish to apply to my 2503. However I dont have a spare AUI for it, thus no ethernet activity at the moment. I know you can upload new IOS via ROMMON, because I did it once before. Last time I did it, because my TFTP failed and I went straight to ROMMON. How does one, delete the current IOS and be able to get back into ROMMON ? Is it as simple as a ctrl-break upon boot ?
Thanks all John ********************************************************************** visit http://www.solution6.com visit http://www.eccountancy.com - everything for accountants. UK Customers - http://www.solution6.co.uk ********************************************************************* This email message (and attachments) may contain information that is confidential to Solution 6. If you are not the intended recipient you cannot use, distribute or copy the message or attachments. In such a case, please notify the sender by return email immediately and erase all copies of the message and attachments. Opinions, conclusions and other information in this message and attachments that do not relate to the official business of Solution 6 are neither given nor endorsed by it. ********************************************************************* Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=49728&t=49728 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]