this setup is simple with two networks with no address translations anywhere.
10.1.1.0/24 -------PIX------- 10.1.2.0/24 i have put in two access lists, one each for both interfaces access-list access_in permit ip any any access-list access_out permit ip any any access-group access_in in interface security0 access-group access_out in interface security100 provided the nat 0 command as well for both interfaces nat (inside) 0 0.0.0.0 0.0.0.0 0 0 nat (outside) 0 0.0.0.0 0.0.0.0 0 0 since there are no address translations etc there is no static command given. right ? i am having a problem with this set up. can someone let me know what exactly is the problem here. __________________________________________________ Do You Yahoo!? Sign up for SBC Yahoo! Dial - First Month Free http://sbc.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=49800&t=49800 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]