1. the example i showed you was based on your previous configuration, and yes you need to have static command to have outside hosts to connect to inside host.
static (inside,outside) 10.1.2.3 10.1.1.3 make sure conduit or have access-list permit the traffic to 10.1.2.3 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=49859&t=49800 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
