I have some of the Cisco 6500 16-port 10/100/1000 RJ45 adapters and they will provide a link with either a straight-through cable or cross-over cable. This worked with the default settings.
Jeffrey Reed Classic Networking, Inc. Cell 717-805-5536 Office 717-737-8586 FAX 717-737-0290 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Greene, Patrick Sent: Wednesday, July 31, 2002 4:38 PM To: [EMAIL PROTECTED] Subject: Cross Over command for ethernet ports.. [7:50310] Do any of the Catalyst switches support the ability to change a port from straigth through to a cross-over port via command line? Somebody told me some of the switches do but I have never seen it before. Thanks, Patrick Confidential e-mail for addressee only. Access to this e-mail by anyone else is unauthorized. If you have received this message in error, please notify the sender immediately by reply e-mail and destroy the original communication. 2 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=50399&t=50310 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]