Lidiya White wrote: > > Capture debugs on both ends at the same time. Should be more > helpful. > Make sure both ends have "isakmp identify address"... > > -- Lidiya White
Sounds like a good idea. So Mike, what was the problem? It sure would help those of learning IPSec to hear how you resolved the issue. Thanks. Priscilla > > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On > Behalf Of > [EMAIL PROTECTED] > Sent: Tuesday, July 30, 2002 4:05 PM > To: [EMAIL PROTECTED] > Subject: RE: VPN not connecting [7:50144] > > The ACLs are mirrors of each other and the transform sets > match.... > Very > frustrating.... > > -----Original Message----- > From: Silju Pillai [mailto:[EMAIL PROTECTED]] > Sent: Tuesday, July 30, 2002 2:29 PM > To: [EMAIL PROTECTED] > Subject: RE: VPN not connecting [7:50144] > > > Hi, > > Pls check the interesting traffic configured > (access list) configured at both ends. Your transform set > parameters > too. It > should be same. > > As you are receiving IKMP_no_error your isakmp policies are > working > fine. > > regards > > Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=50439&t=50144 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]