What does a show IP ospf data show? You can do a "show IP OSPF data | include 10.20.30.40" to check the ospf database for the routing entry there ( assuming 10.20.30.40 is your /24 of course )
Thanks Larry -----Original Message----- From: Ejay Hire [mailto:[EMAIL PROTECTED]] Sent: Friday, August 02, 2002 11:40 AM To: [EMAIL PROTECTED] Subject: Problem Redistributing BGP into OSPF. [7:50539] Hi all. I was wondering if anyone has seen this before and could offer some advice. I have four routers, connected as follows. ISP1-ebgp-EdgeRouter1-ibgp-Core1-OSPF-Core2 EdgeRouter1 is advertising a Default route and a single /24 to Core1. Core1 is using "default-info Originate" to copy the default route into OSPF. That works great. On Core1 I am also using "redistribute bgp 65530 metric 1000 subnets" to copy the /24 into OSPF. This doesn't appear to be working. Specifically, the problem I am having is that Core2 doesn't seem to be receiving the /24 (from ospf). I have verified that the /24 is being advertised by Edge1 (show ip bgp neigh x.x.x.x adv), and that it is appearing in the Route Table of Core1. Anyone have any suggestions? Please CC: [EMAIL PROTECTED] on replies, as I am on the newsfeed and direct gets to me more quickly. Thanks, Ejay Hire _________________________________________________________________ Join the worlds largest e-mail service with MSN Hotmail. http://www.hotmail.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=50541&t=50539 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
