I have a DEC server that communicates to the network through an AUI to ethernet converter. It synchs up to the 6509 at 10mb/half duplex which is all that it will run at but I'm getting many many errors on the port. I have seen this with some other devices that we have to run the converters on. Before bringing down the connection by forcing the port to 10mb/half duplex, has anyone seen this clean up errors. Are there other ways to prevent so many errors?
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=51451&t=51451 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]