Hello, This looks to be a very straight forward configuration, but it is giving me fits. It's a simple Multilink PPP setup.
I can "ping" from Router A to Router B, but I can't do any TCP i.e. Telnet, SSH, Traceroute, etc. All I want to be able to do is telnet from Router A to Router B... The weird thing is, I can telnet from Router B to Router A. Please tell me if I have done something stupid. Router A ip subnet-zero ! no ip bootp server ! ! ! process-max-time 200 ! interface Multilink1 ip address 192.168.1.1 255.255.255.0 ip directed-broadcast ip nat outside no cdp enable ppp multilink multilink load-threshold 2 either multilink-group 1 ! interface Ethernet0/0 no ip address no ip directed-broadcast no ip mroute-cache shutdown no cdp enable ! interface Serial0/0 ip unnumbered Multilink1 ip directed-broadcast encapsulation ppp no ip mroute-cache no fair-queue service-module t1 clock source internal ppp multilink multilink-group 1 ! interface Serial0/1 ip unnumbered Multilink1 ip directed-broadcast encapsulation ppp no ip mroute-cache no fair-queue service-module t1 clock source internal ppp multilink multilink-group 1 ! interface FastEthernet1/0 ip address 172.16.XXX.XXX 255.255.0.0 secondary ip address 209.17.XXX.XXX 255.255.255.0 ip directed-broadcast no cdp enable ! ip classless ip route 0.0.0.0 0.0.0.0 209.17.95.1 ip route 209.17.XXX.144 255.255.255.240 Multilink1 no ip http server Router B ip subnet-zero ip dhcp excluded-address 192.168.4.1 192.168.4.20 ! ip dhcp pool wc network 192.168.4.0 255.255.255.0 default-router 192.168.4.1 dns-server 206.13.XXX.12 206.13.XXX.12 domain-name XXX.net lease 2 ! ! ! ! process-max-time 200 ! interface Multilink1 ip address 192.168.1.2 255.255.255.0 ip directed-broadcast ip nat outside no cdp enable ppp multilink multilink load-threshold 2 either multilink-group 1 ! interface Ethernet0/0 ip address 209.17.XXX.145 255.255.255.240 ip directed-broadcast full-duplex ! interface Serial0/0 ip unnumbered Multilink1 ip directed-broadcast encapsulation ppp no ip mroute-cache no fair-queue ppp multilink multilink-group 1 ! interface Serial0/1 ip unnumbered Multilink1 ip directed-broadcast encapsulation ppp no ip mroute-cache no fair-queue ppp multilink multilink-group 1 ! interface FastEthernet1/0 ip address 192.168.4.1 255.255.255.0 ip directed-broadcast ip nat inside ! ip nat translation timeout 43200 ip nat inside source list 101 interface Ethernet0/0 overload ip classless ip route 0.0.0.0 0.0.0.0 Multilink1 no ip http server Both routers are identical Cisco Internetwork Operating System Software IOS (tm) C2600 Software (C2600-IS-M), Version 12.0(5)T1, RELEASE SOFTWARE (fc1) Copyright (c) 1986-1999 by cisco Systems, Inc. Compiled Tue 17-Aug-99 14:39 by cmong Image text-base: 0x80008088, data-base: 0x80B5E15C ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1) Rhapsody@FIC uptime is 1 week, 20 hours, 21 minutes System returned to ROM by power-on System image file is "flash:c2600-is-mz.120-5.T1" cisco 2610 (MPC860) processor (revision 0x202) with 32768K/8192K bytes of memory. Processor board ID JAD03342330 (2663084462) M860 processor: part number 0, mask 49 Bridging software. X.25 software, Version 3.0.0. 1 Ethernet/IEEE 802.3 interface(s) 1 FastEthernet/IEEE 802.3 interface(s) 2 Serial network interface(s) 32K bytes of non-volatile configuration memory. 16384K bytes of processor board System flash (Read/Write) Configuration register is 0x2102 Any clues? Thanks Rod Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=52054&t=52054 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
