Try putting 'no ip address' on the serial interfaces. You don't need a ip unnumbered or ip address on them if they are part of a multilink-group.
Have you tried removing the NAT? Don't see a complete config for NAT so can't see if it may be a issue. Erick --- Beckwith Rod wrote: > Hello, > > This looks to be a very straight forward > configuration, but it is > giving me fits. It's a simple Multilink PPP setup. > > I can "ping" from Router A to Router B, but I can't > do any > TCP i.e. Telnet, SSH, Traceroute, etc. > > All I want to be able to do is telnet from > Router A to Router B... > > The weird thing is, I can telnet from > Router B to Router A. > > Please tell me if I have done something stupid. > > > > Router A > > ip subnet-zero > ! > no ip bootp server > ! > ! > ! > process-max-time 200 > ! > interface Multilink1 > ip address 192.168.1.1 255.255.255.0 > ip directed-broadcast > ip nat outside > no cdp enable > ppp multilink > multilink load-threshold 2 either > multilink-group 1 > ! > interface Ethernet0/0 > no ip address > no ip directed-broadcast > no ip mroute-cache > shutdown > no cdp enable > ! > interface Serial0/0 > ip unnumbered Multilink1 > ip directed-broadcast > encapsulation ppp > no ip mroute-cache > no fair-queue > service-module t1 clock source internal > ppp multilink > multilink-group 1 > ! > interface Serial0/1 > ip unnumbered Multilink1 > ip directed-broadcast > encapsulation ppp > no ip mroute-cache > no fair-queue > service-module t1 clock source internal > ppp multilink > multilink-group 1 > ! > interface FastEthernet1/0 > ip address 172.16.XXX.XXX 255.255.0.0 secondary > ip address 209.17.XXX.XXX 255.255.255.0 > ip directed-broadcast > no cdp enable > ! > ip classless > ip route 0.0.0.0 0.0.0.0 209.17.95.1 > ip route 209.17.XXX.144 255.255.255.240 Multilink1 > no ip http server > > > > > Router B > > ip subnet-zero > ip dhcp excluded-address 192.168.4.1 192.168.4.20 > ! > ip dhcp pool wc > network 192.168.4.0 255.255.255.0 > default-router 192.168.4.1 > dns-server 206.13.XXX.12 206.13.XXX.12 > domain-name XXX.net > lease 2 > ! > ! > ! > ! > process-max-time 200 > ! > interface Multilink1 > ip address 192.168.1.2 255.255.255.0 > ip directed-broadcast > ip nat outside > no cdp enable > ppp multilink > multilink load-threshold 2 either > multilink-group 1 > ! > interface Ethernet0/0 > ip address 209.17.XXX.145 255.255.255.240 > ip directed-broadcast > full-duplex > ! > interface Serial0/0 > ip unnumbered Multilink1 > ip directed-broadcast > encapsulation ppp > no ip mroute-cache > no fair-queue > ppp multilink > multilink-group 1 > ! > interface Serial0/1 > ip unnumbered Multilink1 > ip directed-broadcast > encapsulation ppp > no ip mroute-cache > no fair-queue > ppp multilink > multilink-group 1 > ! > interface FastEthernet1/0 > ip address 192.168.4.1 255.255.255.0 > ip directed-broadcast > ip nat inside > ! > ip nat translation timeout 43200 > ip nat inside source list 101 interface Ethernet0/0 > overload > ip classless > ip route 0.0.0.0 0.0.0.0 Multilink1 > no ip http server > > > Both routers are identical > > Cisco Internetwork Operating System Software > IOS (tm) C2600 Software (C2600-IS-M), Version > 12.0(5)T1, RELEASE SOFTWARE > (fc1) > Copyright (c) 1986-1999 by cisco Systems, Inc. > Compiled Tue 17-Aug-99 14:39 by cmong > Image text-base: 0x80008088, data-base: 0x80B5E15C > > ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE > SOFTWARE (fc1) > > Rhapsody@FIC uptime is 1 week, 20 hours, 21 minutes > System returned to ROM by power-on > System image file is "flash:c2600-is-mz.120-5.T1" > > cisco 2610 (MPC860) processor (revision 0x202) with > 32768K/8192K bytes of > memory. > Processor board ID JAD03342330 (2663084462) > M860 processor: part number 0, mask 49 > Bridging software. > X.25 software, Version 3.0.0. > 1 Ethernet/IEEE 802.3 interface(s) > 1 FastEthernet/IEEE 802.3 interface(s) > 2 Serial network interface(s) > 32K bytes of non-volatile configuration memory. > 16384K bytes of processor board System flash > (Read/Write) > > Configuration register is 0x2102 > > > > Any clues? > > Thanks > > Rod __________________________________________________ Do You Yahoo!? Yahoo! Finance - Get real-time stock quotes http://finance.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=52058&t=52054 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]