You might want to specify the speed as well. channel-group 0 timeslots 1-24 speed 64
> -----Original Message----- > From: Steven a [mailto:[EMAIL PROTECTED]] > Sent: Monday, August 26, 2002 1:13 PM > To: [EMAIL PROTECTED] > Subject: PA-MCX-8TE1 with Full T1 [7:52090] > > > Is it possible to configure an interface to support a full > non channellized > T1? If so how? > > The T1 interface goes up up but after I config the serial > interface goes UP > UP then after about 10 seconds the serial goes up down. The > T1 never goes > down. > > > version 12.2 > service timestamp > service timestamps log uptime > no service password-encryption > ! > hostname Router > ! > boot bootldr bootflash:c7200-boot-mz.120-17.S > card type t1 1 > enable password > ! > ! > controller T1 1/0 > framing esf > service-type data > clock source internal > linecode b8zs > cablelength short 110 > channel-group 0 timeslots 1-24 > ! > ! > interface Serial1/0:0 > no ip address > ! Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=52091&t=52090 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
