hi all, have the following scenario.
ISP -- DSL Router -- FreeBSD -- 2511 -- CCIE Lab I do a telnet from the internet to my DSL router. from the router a telnet to my unix box. from there I do a "cu -l /dev/cuaa1 -s 9600" to connect to the 2511 via the COM1. this works fine !! from the 2511 I can connect via reverse telnet to my lab routers it's not possible to logout from the routers and come back to the 2511. - CTRL+SHIFT+6 x isn't working at all - CTRL+6 x is disconnecting all telnet sessions and throwing me back to the prompt of my dsl router. - disconnect isn't working - exit and logout are giving me the following R2 con0 is now available Press RETURN to get started. after I press return I am back on the router to which I did the reverse telnet from the 2511. how can I come back to the 2511 without loosing all the telnet sessions ??!?!? hope somebody can help thanks monti Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=52270&t=52270 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]