In a similar situation I found that entering ctrl+shift+6 twice before the x worked. The sequence is ctrl+shift+6 ctrl+shift+6 x. Good luck. -gt
Antonio Montana wrote: > > hi all, > > have the following scenario. > > ISP -- DSL Router -- FreeBSD -- 2511 -- CCIE Lab > > I do a telnet from the internet to my DSL router. > from the router a telnet to my unix box. > from there I do a "cu -l /dev/cuaa1 -s 9600" to connect to the > 2511 via the COM1. this works fine !! > > from the 2511 I can connect via reverse telnet to my lab routers > > it's not possible to logout from the routers and come back to > the 2511. > > - CTRL+SHIFT+6 x isn't working at all > - CTRL+6 x is disconnecting all telnet sessions and throwing me > back to the prompt of my dsl router. > - disconnect isn't working > - exit and logout are giving me the following > > R2 con0 is now available > > > > > Press RETURN to get started. > > > after I press return I am back on the router to which I did the > reverse telnet from the 2511. > > > how can I come back to the 2511 without loosing all the telnet > sessions ??!?!? > > hope somebody can help > > thanks > monti > > > Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=52279&t=52270 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]