All, I'm totally stumped here. Here's my situation... I have taken a bunch of roll-over cables, snipped of one end, and punched them onto a patch panel that I had laying around. When I need to switch back and forth between consoles, I just move my patch cable from port to port on the patch panel (yeah, I know, the access-server is the next thing on my list to buy). I'm using minicom on RH 7.0 and it works great...except for one of my 2501's. I have tried multiple cables off of multiple ports on the patch panel, and all cables work on all the other routers. This one 2501 just refuses to accept input from Mincom, though it will give normal output to the console. Now here's the weird thing...If I plug a patch cable from the patch panel into my Win2K box, the router works just fine. What is it about this one router that Minicom won't work with it? Any thoughts? Thanks.
Kelly Cobean Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=52416&t=52416 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
