Have you configured any connection over this Imagroup ? If yes, then you need to remove the connection first before deleting the Imagroup.
If not, feedusback. Regards, Yasser Regards, Yasser >From: "Mohamed Elkomy" > >Dear all, > >I've a problem when trying to delelte an IMA group on MGX 8250....First of >all I try the following : > >1- delport (port no.) > > Error occurred during the SNMP SET operation !! >Probable Reason : "Port is disabled" >SNMP Error Code : 29 > >but when I make "sh port (port no.)".....the port status in enabled. > >2- delimagrp (IMAGrp no.) > > Error occurred during the SNMP SET operation !! > Probable Reason : "Failed to delete Port-Controller resource partitions >existing on this port" > SNMP Error Code : 6 > >3- dellnsfmimagrp (IMAGrp No.) (list of links) > > Error occurred during the SNMP SET operation !! > Probable Reason : "delete links: #of links becoming less than P:n" > SNMP Error Code : 6 > >This IMAgrp is simply consisting of one link and i'm trying to delete this >link and delete the IMAGrp ....so what's wrong with what I did.....and >what're the proper steps for deleting the line and the whole IMAgrp. > >Thks/BR > Komy > > > misconduct and Nondisclosure violations to [EMAIL PROTECTED] ------------------------------------------------------------------------ Send and receive Hotmail on your mobile device: Click Here Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=52474&t=52472 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
