Create a 'bridge-group' by issuing the command on the interfaces you want to span.
-----Original Message----- From: Arni V. Skarphedinsson [mailto:[EMAIL PROTECTED]] Sent: Tuesday, September 03, 2002 11:25 AM To: [EMAIL PROTECTED] Subject: VLan encap. over WAN [7:52613] I have the following problem, I have two locations connected bya ATM from a service provide, and I get ethernet at each end, now I would like to send Vlan tagged frames 802.1q over the link, as I need to have two IP networks span both sites. But when I turn tagging on, It does not work, and the Provider says that his equipment can4t handle the tagged frames Is there any way to work around this, with routing or switching ?? please let me know Best regards Arni Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=52615&t=52613 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
