hmm. last post got cutoff. Download the .tar file if you plan to use the HTML interface and do a:
archive download-sw tftp://10.1.1.1/image.tar check out the options after "download-sw". 3550 come with 16megs flash, so you can do a /leave-sw and keep the old image for failover. >>> "MADMAN" 09/06 1:41 PM >>> Since your simply downloading the .bin file why don't you simply do a "copy tftp flash"? Dave Juan Blanco wrote: > > Team, > I just got a 3550 switch(current smi image), I am trying to put the new emi > image but I am getting the following error...What I am doing wrong.... > > Switch#$downnload-sw tftp://192.149.64.17/c3550-i5q3l2-mz.121-11.EA1.bin > examining image... > Loading c3550-i5q3l2-mz.121-11.EA1.bin .from 192.149.64.17 (via Vlan1): ! > %Tar checksum error in tftp://192.149.64.17/c3550-i5q3l2-mz.121-11.EA1.bin > %Error opening flash:update/info (No such file or directory) > ERROR: Image is not a valid IOS image archive. > Switch# > > Thanks.... > > JB -- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367 "You don't make the poor richer by making the rich poorer." --Winston Churchill Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=52814&t=52807 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]