Dear Group, I am having a setup like this :-
cat6k ---------- cat6k <==== Coer switches | | | | |---- Cat5k----| <===== Floor switch |---- Cat5k----| <===== Floor switch I am connecting the sniffer on one of my core switches (cat6ks) and without doing port mirroring (SPAN) able to see the unicast packets flow between 2 Windows NT servers. Does this indicate unicast port flooding ??? or is this the default behavior of my Sniffer s/w. I am using Network associates Sniffer s/w. The port where the PC is connected is also in the same vlan in which the Windows NT servers are connected. Both the Servers are connected on the same switch. The servers are Win2k. Has anybody faced a similar problem like this ??? many thanks in advance Hitesh DISCLAIMER: Information contained and transmitted by this E-MAIL is proprietary to Wipro Limited and is intended for use only by the individual or entity to which it is addressed, and may contain information that is privileged, confidential or exempt from disclosure under applicable law. If this is a forwarded message, the content of this E-MAIL may not have been sent with the authority of the Company. If you are not the intended recipient, an agent of the intended recipient or a person responsible for delivering the information to the named recipient, you are notified that any use, distribution, transmission, printing, copying or dissemination of this information in any way or in any manner is strictly prohibited. If you have received this communication in error, please delete this mail & notify us immediately at [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=52907&t=52907 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
