Hi All I'm configuring a 7204vxr to back up a leased line, I've inserted a port adaptor card with 4E1 interfaces (PA-4E1G). I loaded a new version of IOS that supported the interface, 12.1(1a)T1, so that the router now recognises the card.
I'm trying to configure the interface for ISDN/E1 and I can't enter the controller command to config the D channel. Looks like an unsupported feature I thought so I've double checked and the features for isdn/dial all seem to be supported by the IP version. I hope that I'm missing some very simple and can avoid a reload, here's the show version, any ideas thanks Pat #sh ver Cisco Internetwork Operating System Software IOS (tm) 7200 Software (C7200-IS-M), Version 12.1(1a)T1, RELEASE SOFTWARE (fc1) Copyright (c) 1986-2000 by cisco Systems, Inc. Compiled Sat 01-Apr-00 02:20 by ccai Image text-base: 0x60008900, data-base: 0x61526000 ROM: System Bootstrap, Version 12.2(1r) [dchih 1r], RELEASE SOFTWARE (fc1) BOOTFLASH: 7200 Software (C7200-BOOT-M), Version 12.0(13)S, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1) RouterX uptime is 2 days, 1 hour, 35 minutes System returned to ROM by reload at 10:03:55 MEST1 Sun Sep 8 2002 System restarted at 10:02:17 MEST1 Sun Sep 8 2002 System image file is "nmp:/c7200-is-mz.121-1a.T1.bin" cisco 7204VXR (NPE225) processor (revision A) with 122880K/8192K bytes of memory. Processor board ID 23673112 R527x CPU at 262Mhz, Implementation 40, Rev 10.0, 2048KB L2 Cache 4 slot VXR midplane, Version 2.3 Last reset from power-on G.703/E1 software, Version 1.0. G.703/JT2 software, Version 1.0. Bridging software. X.25 software, Version 3.0.0. 2 FastEthernet/IEEE 802.3 interface(s) 6 Serial network interface(s) 125K bytes of non-volatile configuration memory. 46976K bytes of ATA PCMCIA card at slot 0 (Sector size 512 bytes). 4096K bytes of Flash internal SIMM (Sector size 256K). Configuration register is 0x102 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=52974&t=52974 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]