There is no controller, isn't this just the equivalent of a PA-4T+ on this side of the pond??
Dave Patrick Donlon wrote: > > Hi All > > I'm configuring a 7204vxr to back up a leased line, I've inserted a port > adaptor card with 4E1 interfaces (PA-4E1G). I loaded a new version of IOS > that supported the interface, 12.1(1a)T1, so that the router now recognises > the card. > > I'm trying to configure the interface for ISDN/E1 and I can't enter the > controller command to config the D channel. Looks like an unsupported > feature I thought so I've double checked and the features for isdn/dial all > seem to be supported by the IP version. I hope that I'm missing some very > simple and can avoid a reload, here's the show version, any ideas thanks > > Pat > > #sh ver > Cisco Internetwork Operating System Software > IOS (tm) 7200 Software (C7200-IS-M), Version 12.1(1a)T1, RELEASE SOFTWARE > (fc1) > Copyright (c) 1986-2000 by cisco Systems, Inc. > Compiled Sat 01-Apr-00 02:20 by ccai > Image text-base: 0x60008900, data-base: 0x61526000 > > ROM: System Bootstrap, Version 12.2(1r) [dchih 1r], RELEASE SOFTWARE (fc1) > BOOTFLASH: 7200 Software (C7200-BOOT-M), Version 12.0(13)S, EARLY DEPLOYMENT > RELEASE SOFTWARE (fc1) > > RouterX uptime is 2 days, 1 hour, 35 minutes > System returned to ROM by reload at 10:03:55 MEST1 Sun Sep 8 2002 > System restarted at 10:02:17 MEST1 Sun Sep 8 2002 > System image file is "nmp:/c7200-is-mz.121-1a.T1.bin" > > cisco 7204VXR (NPE225) processor (revision A) with 122880K/8192K bytes of > memory. > Processor board ID 23673112 > R527x CPU at 262Mhz, Implementation 40, Rev 10.0, 2048KB L2 Cache > 4 slot VXR midplane, Version 2.3 > > Last reset from power-on > G.703/E1 software, Version 1.0. > G.703/JT2 software, Version 1.0. > Bridging software. > X.25 software, Version 3.0.0. > 2 FastEthernet/IEEE 802.3 interface(s) > 6 Serial network interface(s) > 125K bytes of non-volatile configuration memory. > > 46976K bytes of ATA PCMCIA card at slot 0 (Sector size 512 bytes). > 4096K bytes of Flash internal SIMM (Sector size 256K). > Configuration register is 0x102 -- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367 "You don't make the poor richer by making the rich poorer." --Winston Churchill Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=52987&t=52974 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]