well I think port security would still be helpful. Port security is concerned with outgoing traffic from the port not incoming.
setting the security to allow only one MAC would prevent another computer from using the port. If another computer tried to use the port with the wrong MAC then the port would shut down after 90 seconds. Kevin Wigle ----- Original Message ----- From: "Sasa Milic" To: Sent: Tuesday, September 17, 2002 1:20 PM Subject: Re: Port Security on 3550 [7:53446] > With "port security" command, but it won't help you. Anyone > can connect passive sniffer to that port, and switch won't > block the port since there is no incoming traffic (you > will configure port to be SPAN, right ? So anyone can sniff > on that port). > > Sasa > > > JohnZ wrote: > > > > How do you enable port security on a 3550. I want to use a port for sniffer > > and want to make sure that only my laptop is able to gain access on that > > certain port. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=53500&t=53446 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
