Do you see MPPP bundle interface with "show users" ? Those are users that have specified that MPPP will be used, so bundle is created on cisco side. That still doesn't mean that they use both B channels. Now check with show interface ... the speed; it will be either 64 or 128Kbps (or more if someone with more that one BRI dialed). Bundle interface name is listed in "show users" output. It's virtual-access interface, so it should be something like "show interface virtual-access Vi10", for example.
I'm sorry if I missed something, it's been almost two years since I touch 3640/dial-in box. Sasa Michael Williams wrote: > > Hello all, > > We have a 3640 setup with two PRI lines and a bunch of MICA modems. I have > it configured so that we can accept incoming async modem calls or ISDN calls > that use either 1 or 2 B-channels (using MPPP to allow bonding of thw two B > channels). > > Is there a way to check the "speed" of an ISDN call that is active? (similar > to show modem #/# to check the speed of an active async call) > > The issue is we have an ISDN caller, and upon connection, I only show a > single B channel being used, but her modem shows both B channels being > active, and her PC shows a speed of 115000 (2x56Kbps???) Can't ISDN B > channels only support either 56K or 64K? > > I've done a debug isdn q931, and that's where I see that only one channel is > coming up and active. > > Any suggestions or input is appreciated. > > Thanks! > Mike W. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=53572&t=53563 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]